Dale;
I sure recommend it.
As far as "spray can" degreasers are concerned, I buy whatever "carb
cleaner" is on sale. It's still an expensive was to buy degreaser,
though.
Regards, Neil Tucson, AZ
-----Original Message-----
From: Dale.Clay@mdhelicopters.com [mailto:Dale.Clay@mdhelicopters.com]
Sent: Wednesday, November 02, 2005 9:56 AM
To: Albaugh, Neil; saltfever@comcast.net; land-speed@autox.team.net
Subject: RE: Degreaser
At our helicopter company we are REQUIRED to wear rubber gloves when
using
any solvent other than isopropyl alcohol. Some require masks as well.
Dale C.
Subject: RE: Degreaser
Elon;
I usually use three types of degreasers;
1. For the big, really cruddy parts I use kerosene and a stiff brush--
kerosene is available from some gas stations.
2. Final cleaning is usually with lacquer thinner. I buy these 1 gal
metal cans from a discount paint store.
3. For a somewhat "hotter" solvent, I use MEK (methyl ethyl ketone); I
also buy these 1 gal metal cans from a discount paint store.
If you can ever find it, Stoddard Solvent is superb; it has a very high
Kaury Butynol value (great degreasing power). Another final cleaning
solvent is toluene. Perchloroethylene is great but hard to find.
As with any solvents, they should be used with caution-- many are
flammable and others are not that great for skin exposure.
Regards, Neil Tucson, AZ
-----Original Message-----
From: owner-land-speed@autox.team.net
[mailto:owner-land-speed@autox.team.net] On Behalf Of Elon
Sent: Tuesday, November 01, 2005 6:16 PM
To: land-speed submit
Subject: Degreaser
What is everyone's favorite spray-can degreaser? I see a lot of it used
at
the races. Cost? Brand? Mail order or store? What quantities do you
usually
buy? -Elon
|