Keith
Will be going to WOS and will be looking forward to seeing all of you there.
Heard you mentioned your Rodeck engine. What's the displacement, what heads
are you using, etc?
Bob Ragsdale
#745
----- Original Message -----
From: Keith Turk <kturk@ala.net>
To: Dick J <lsr_man@yahoo.com>; <Saltracer54@aol.com>;
<land-speed@autox.team.net>
Sent: Monday, August 28, 2000 9:39 PM
Subject: Re: Shop Safety
> When We started this list I used to come up with dumb things I did in the
> shop.... or my best shop tip.... just as things we could talk about....
>
> Wait a min I am still talking about Dumb things I do... NEVERMIND....
>
> Seriously any safety tip at all might help another one of us....
>
> Keith
>
> ----------
> > From: Dick J <lsr_man@yahoo.com>
> > To: Saltracer54@aol.com; land-speed@autox.team.net
> > Subject: Re: Shop Safety
> > Date: Monday, August 28, 2000 4:23 PM
> >
> > DANG GARY - -That doesn't sound like much fun at
> > all.
> > Many moons ago I taught safety for the Air Force.
> > One of the training aids I used was a pair of
> > plastic safety goggles with one of those heavy
> > twisted strands of wire from a heavy duty wire
> > wheel stuck half way through one of the lenses.
> > I used to be lax on safety around the home shop
> > until I got that job. Since then, I've been
> > pretty carefull, but I have to admit, I still do
> > some pretty stupid things.
> > My best wishes for a speedy and complete
> > recovery. Keep in touch.
> >
> >
> > =====
> > * * * * * * * * * * * * * *
> > * Dick J *
> > * (In East Texas) *
> > * # 729 *
> > * C/GRS C/FRS D/STR *
> > * * * * * * * * * * * * * *
> >
> > __________________________________________________
> > Yahoo! Mail - Free email you can access from anywhere!
>
|