Steve:
I strongly second David's motion - it has happened to me. It can be
intermittent if the debris is floating around inside the operating valve
rod - very frustrating to diagnose!
The good thing is that it is one of the easiest fixes to do on the
overdrive - from the top with the tunnel cover off.
Let us know.
Earl Kagna
Victoria, B.C.
BT7 tri-carb
BJ8
----- Original Message -----
From: "David Nock" <healeydoc@sbcglobal.net>
To: <sbyers@ec.rr.com>
Cc: <healeys@autox.team.net>
Sent: Tuesday, September 18, 2007 8:04 AM
Subject: Re: [Healeys] Overdrive problem
The operating rod that lifts the actuating check ball has a very
small bleed hole about 1/3 down the rod if this hole is plugged it
will be slow at disengaging.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|