Re: [Fot] Southwick Conversion - keeping the bearing in place?

[DAVE HOGYE via Fot <fot@autox.team.net>]

Hi Chris,
I have pressed the retainers on and have removed them with a cut-off disc.  Of 
course I don't cut through the retainer, but close enough to finish with a 
chisel.  I found that the retainers are available in two widths. The wide one 
would have more retaining tension.  But, as someone suggested, the axle 
diameter dimension may be in question too. 
Best, Dave H.
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot