I used large U-bolts as well.
On 2/1/2011 11:23 AM, Steven Belfer wrote:
> I have the Southwick conversion on my TR3 with the stock-length axle
> tubes. There plates were ground down a bit to fit over the flange.
> It gets thin in places. Also, the guy who performed the conversion
> used U-bolts of different diameters so that the outer's are thinner to
> make a better fit over the flange.
>
> ~Steve
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/cartravel@pobox.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|