I did not have my Southwick axles lengthened, just spent a bit of time
with the die grinder and all was good. I had some light tire rub with
the 205 Speedsters, so I rolled the inner fender flange over wire. If
the axles were 1/8 inch longer, more drastic measures would have been
required to fit the 205's.
On 1/31/2011 1:11 PM, davehogye wrote:
> It's good to get some feedback regarding adjusting fender clearance.
> It has been brought to my attention that track may be measured by some racing
>groups.
> Has anyone had their cars' track scrutinized?
> Tire and wheel size is related to the matter of clearance as well. I believe
>that TR3s should be to running 5.5" wheels max., but that depends on the race
>organization.
> What tire, wheel, spacer combinations are being used for TR3s? If spacers are
>being used, then maybe the axle could be lengthen a bit.
> Could the Southwick conversion for TR3s be lengthened by 1/4" overall? Is it
>worth going to the trouble of having the option from Southwick?
> Moser cuts and machines the axles, it seams to me that an 1/8" adjustment
>could be easily made.
> Again, 1/8" would really help the weld grinding situation. There really isn't
>that much weld on there when compared the the tube thickness. Perhaps no one
>has had a problem after removing some weld, but I thought this question was
>worth asking. If added length creates other problems, then it's probably not a
>good idea.
> Thanks for the commentary,
> Dave H.
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/cartravel@pobox.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|