Okay,
Now I have to jump in here.... these comments are right on the mark.
However, (working in aviation....) I have always had the impression that the
flywheel bolts that ARP sells are a much better bolt even than the NAS
series, (which is superior to the MS bolts.... )
Does anyone have the numbers close at hand that they can compare
strengths...... I have them on the ac bolts, but I would have to dig up the
numbers...
Tom
----- Original Message -----
From: <EPRacer@aol.com>
To: <19to1tr6@attbi.com>; <fot@autox.team.net>
Sent: Saturday, August 24, 2002 8:44 AM
Subject: Re: Flywheel bolts
> Rob:
>
> Check to make sure the aluminum flywheel is the same thickness at the
> mounting point as the stock flywheel. My Tilton flywheel is much thinner
and
> uses shorter bolts. Check Coast Fabrication for NAS or MS21250 bolts.
They
> are available in many lengths and are as strong or stronger.
>
> Hope this helps,
> Lyn Pollock
> EPRacer@aol.com
|