Hello everyone I have been trying to get the correct bolts. ARP's
designated TR-6 flywheel bolt kit is almost 1/4" short of stock tr F.W. bolts
and will engage the crank buy only 1/4 " aprox. 6 or 8 threads. Arp has other
bolts 1/4 longer than stock tr-6 bolts and will work fine but the nut size is
0nly 5/8 not 3/4 like the stock thier kit is also 3/4 nut size but short On
an aluminum fly wheel will the smaller head size make a differance. If it
does can I make up the loss of holding power with a grade 8 washer thanks
rob
|