Re: tr3/4 axles

[emanteno@ix.netcom.com]

Ted Schumacher wrote:

> joe, the axles that chip is talking about and the axles i propose are
> the same basic product.  the difference is strictly in the addition of
> the splined axle end and the splined hub.  axles are heat treated,etc,
> just taken a step further. ted

Ted,

During this project, there has been some suggestion that perhaps the
taper in the stock axles was their weak point. Do your axles have a
taper, or is that eliminated by the splined hubs?

Irv