datsun-roadsters
[Top] [All Lists]

RE: Wheels (rim's)

To: "'Jim Svedise'" <svedise@hotmail.com>
Subject: RE: Wheels (rim's)
From: "Brian Hollands" <bhollan4@tampabay.rr.com>
Date: Thu, 9 Sep 2004 09:32:53 -0400
A couple of things.  First, as far as I'm aware, the rewind only comes
in a 14x7 -9!  This will fit on the front of a roadster but will not fit
under stock rear fenders.  If you've talked to this company and they
have them in + offsets then you've found a nice wheel.  As stated
earlier, anything from a +9 to a +15 should work fine for a 7 inch wide
wheel.  If that's the case, by all means let us know.  Otherwise, make
sure you can test fit a wheel/tire combo on the rear before you commit.
Second, if the 14x7 -9 is the only size they have, Gabe Tyler at Techno
Toy tuning http://www.technotoytuning.com/ sells a full set of 4 for
$325.
Good luck.

Brian Hollands
CSP '69 Datsun 2000
Tampa, FL
web.Tampabay.rr.com/oilleak






<Prev in Thread] Current Thread [Next in Thread>