Blake, It's not that hard to get the carbs off, really. Take the front off
first then the back. If your hand cramps, take a break. The REALLY hard part
is the inside/lower/aft manifold nut. No Tricks, just slow patient, 1/4
turn, turn the wrench over, 1/4 turn, turn the wrench over, again and again
and again.
----- Original Message -----
From: Blake Dietze <wb6jhj@ix.netcom.com>
To: <datsun-roadsters@autox.team.net>
Sent: Friday, July 19, 2002 8:22 PM
Subject: Any tips or tricks for removing carbs
Hi gang;
Does anyone have advise for pulling the carbs off my 69 2000? The exhaust
manifold is "shot" so I've purchased a header from Fairlady products and
I'm
ready to replace it. I am assuming that the carbs come off the intake
manifold, followed by the heat shield, then the manifolds from the head. A
couple of those 8 carburetor bolts look a bit difficult to get to. Any
advise
appreciated.
Blake Dietze
Vancouver, WA
'69 Datsun 2000
SRL311-12049
/// datsun-roadsters@autox.team.net mailing list
/// datsun-roadsters@autox.team.net mailing list
|