Re: Fuel Starvation - Need Help

[Toby B <toby@wolfenet.com>]

And, heck,
        while you're there, check the resistor and its connections- I've had
problems with the spade lugs getting corroded... 
Toby

Philip Erickson wrote:
> 
> Mike,
> I agree with Jim,
> Check to see if the coil is HOT when it quits.
> if so, check that the ballast resister is wired correctly.
> I have seen a ballast resister type coil installed without the resister give 
>the
> same symptoms.