Okay - Partial Success. The drivers side signal now works. as well as the
wipers, horn and blower. I pulled the front turn signal lenses. Messy in
there. I pulled the bulbs, cleaned everything out, then replaced the bulbs
after giving the bases a thin coating of dialectric grease. I also
apparently have corrosion and an intermittent contact at the fuse box. I
think I should replace the spade connectors on the wires. Are these crimped
or soldered? I will also check the bulbs on the passenger side.
I suppose I could replace the fuse box, but I am not sure how to avoid
interference with the clutch fluid reservoir. Any ideas?
Regards,
John Cyg.
|