Mail Archive Search: <+from:BSHolden@aol.com>

Results:

References: [ +from:BSHolden@aol.com: 41 ]

Total 41 documents matching your query.

1. Ground Source Heat Pumps (Was Shop heater) (score: 1): Author: BSHolden@aol.com; Date: Tue, 13 Dec 2005 11:44:54 EST; Google <Waterfurnace> to find over 40,000 references to GSHP's. When I built this house in 94 I had a Waterfurnace brand unit installed. I also sprung for the hot water option, which during the cooli; /html/shop-talk/2005-12/msg00191.html (7,912 bytes)
2. Re: Ground Source Heat Pumps (Was Shop heater) (score: 1): Author: BSHolden@aol.com; Date: Tue, 13 Dec 2005 12:57:41 EST; It has been a great system for me here in central Iowa and according to Compared to what, straight electric heat ? Did that include an allowance for increased maintenance costs ? Or shorter lifetime; /html/shop-talk/2005-12/msg00193.html (9,759 bytes)
3. Re: Compressor plumbing detail (score: 1): Author: BSHolden@aol.com; Date: Wed, 16 Nov 2005 14:00:50 EST; shop-talk supported in part by Fat Chance Garage http://fatchancegarage.com The flex hose from the compressor to the rigid plumbing: I use 3/4" ID hydraulic hose. This stuff is rated to +2,000 PSI an; /html/shop-talk/2005-11/msg00096.html (7,856 bytes)
4. Re: Belt drive lawn tractor... needs belts? (score: 1): Author: BSHolden@aol.com; Date: Mon, 25 Jul 2005 20:57:21 EDT; I believe that ej hit the nail: It's probably that blasted center adjustable shiv/pully. As the former owner of a JD210 with a variable speed drive I can testify that the adjustability feature wears; /html/shop-talk/2005-07/msg00156.html (8,447 bytes)
5. Re: Auxiliary Trailer Battery (score: 1): Author: BSHolden@aol.com; Date: Thu, 26 May 2005 14:56:56 EDT; I keep my emergency trailer breakaway battery charged by wiring the battery to the running light circuit using a diode (part number ECG 576) made by Philips. This component will pass current up to 5; /html/shop-talk/2005-05/msg00065.html (7,590 bytes)
6. Re: Workshop Floor (score: 1): Author: BSHolden@aol.com; Date: Tue, 1 Feb 2005 12:32:41 EST; My 30'x36' shop floor was "smooth finished" by 1 guy using only a hand trowel. It was impressive to watch him work. Especially so since he had to slightly slope the floor to a centrally located floo; /html/shop-talk/2005-02/msg00003.html (7,179 bytes)
7. Re: 2005 toyota tacoma (score: 1): Author: BSHolden@aol.com; Date: Sun, 13 Feb 2005 23:04:06 EST; I suspect that your oil change light is related to duty cycle parameters which include ambient and engine operating temps achieved during each trip. To my (limited) knowledge, sensors capable of dete; /html/shop-talk/2005-02/msg00078.html (8,252 bytes)
8. Re: trailer deck - steel vs wood (score: 1): Author: BSHolden@aol.com; Date: Thu, 24 Feb 2005 13:19:22 EST; I built my wood decked trailer back in '93 and so far the 5/4" decking is fine despite outside storage and regular usage in hauling around a compact tractor and various cars. I believe that the deck; /html/shop-talk/2005-02/msg00127.html (7,528 bytes)
9. Re: Car wheel dollies (score: 1): Author: BSHolden@aol.com; Date: Mon, 15 Nov 2004 18:19:48 EST; Harbor Freight. I paid sale price of ~$70 for 2 pairs a couple of years ago. They have worked well for my 2200 lb Omni and had room to spare even with 225/45-15 tires on 9" wide rims. Bart Holden; /html/shop-talk/2004-11/msg00031.html (7,160 bytes)
10. Re: Oil change interval for synthetic oil (score: 1): Author: BSHolden@aol.com; Date: Sun, 12 Sep 2004 21:08:01 EDT; I am inclined to perform an oil (Mobile 1) and filter change every 5,000 miles on my Durango that is used as a tow vehicle and for every day local travel. Better safe than sorry. And not quite as an; /html/shop-talk/2004-09/msg00121.html (8,405 bytes)
11. Re: weed killer (score: 1): Author: BSHolden@aol.com; Date: Tue, 15 Jun 2004 12:27:48 EDT; Try Chlorine for long term effect. BS Holden; /html/shop-talk/2004-06/msg00103.html (7,294 bytes)
12. Re: lawn tractor advice needed (score: 1): Author: BSHolden@aol.com; Date: Fri, 12 Mar 2004 19:13:58 EST; I've currently > got isn't going to cut it... :-) -- Mark; A resource I have found useful is: tractorbynet.com I have to mow ~2 acres of lawn and used a mid-80's John Deere 210 equipped with a Kohler; /html/shop-talk/2004-03/msg00031.html (8,924 bytes)
13. Re: meek MIG melting aluminum? (score: 1): Author: BSHolden@aol.com; Date: Sun, 21 Mar 2004 22:52:47 EST; -- -- It has been my experience that power is a factor secondary to materials (wire, gas and wire liners) to cleanliness of the material to be welded and technique. I am sure that your welder could h; /html/shop-talk/2004-03/msg00091.html (7,203 bytes)
14. Re: even MORE air line questions. (score: 1): Author: BSHolden@aol.com; Date: Tue, 21 Jan 2003 18:30:44 EST; << but on the compressor end, I'm having problems, the compressor fitting is 3/4", the downspout for the compressor is 3/4"; I'd like to use some sort of flexible hose to connect the two to avoid vib; /html/shop-talk/2003-01/msg00111.html (8,341 bytes)
15. Re: Air tank (score: 1): Author: BSHolden@aol.com; Date: Tue, 17 Dec 2002 19:21:59 EST; -- Well heck Larry, Last time I checked my local hardware store (Menards) sell kits to adapt these tanks for this purpose. Not sure what pressure the tanks are designed for, but bet it's for more th; /html/shop-talk/2002-12/msg00093.html (7,516 bytes)
16. Re: Another washer question (score: 1): Author: BSHolden@aol.com; Date: Fri, 16 Aug 2002 17:33:34 EDT; RW scribes: -- I bought my 1st washing machine (used) and hooked up it's drain nipple with a 6' length of plain old rubber hose, which dumped into the basement floor drain. The danged machine refused; /html/shop-talk/2002-08/msg00146.html (7,756 bytes)
17. Re: sistering floor joists (score: 1): Author: BSHolden@aol.com; Date: Fri, 9 Nov 2001 19:58:11 EST; Richard scribes: -- Coat the mating surfaces of the (new) sister and the existing joist. Clamp them together. Then use "premium deck screws" (that's what we call 'em here in the midwest) at a 6" or s; /html/shop-talk/2001-11/msg00095.html (7,364 bytes)
18. Re: Sand Blasting Cabinets (score: 1): Author: BSHolden@aol.com; Date: Mon, 26 Nov 2001 21:37:22 EST; -- About 12 years ago, I built my 3'x2' x2' "blast cabinet"; Out of 2x4's, 3 sheets of 1/2" plywood, a used 5 gallon drywall bucket, a pair of rubberized gloves with a reach of ~ 12 reach from the l; /html/shop-talk/2001-11/msg00172.html (7,922 bytes)
19. Re: kohler engine work (score: 1): Author: BSHolden@aol.com; Date: Wed, 22 Aug 2001 20:10:10 EDT; -- Could it be the valve guides? Maybe the removal of the valve springs and a check of guide2valve shaft play is in order? And heck while you're this far.....mill the head, de-glaze the cylinder wal; /html/shop-talk/2001-08/msg00113.html (7,285 bytes)
20. Re: PVC for air lines (was: Setting up air lines in the shop) (score: 1): Author: BSHolden@aol.com; Date: Fri, 31 Aug 2001 18:05:02 EDT; this soldered -- Plumbed my shop with 3/4" rigid copper pipe about 5 years ago, taking into consideration condensation issues (installing a drain valve and trap at the beginning of the run as well a; /html/shop-talk/2001-08/msg00227.html (9,948 bytes)

Current List: 1 - 20
Page: [1] [2] [3]