I have questions about 2 wheel drive 97 blazer? I Changed front brake pads and a rotor but now the auto trans will not come out of park unless i use the bypass button by the shifter to get it to go i
I recently replaced the front wheels cylinders on my 51 1/2 ton ( All stock brakes except master cylinder is a airhart after market )i have bleed the brakes at least 4 or 5 times and still have the s
Hi is Anyone going to the car show in Daytona Beach Fl "Spring Fling" we will be going saturday. It has always been a pretty good show lots of vendors and some really nice cars and trucks. Steve olet
I have a 48 chevy pickup a total restoration for sure or parts vehicle . Its in Ocala Fl $225.00. I got a little over $400.00 invested in it (it came included with another truck i bought). E-mail me
About 6 months i went to Rentz Ga and picked up the two old chevys the 53 runs all stock and the 48 chevy has the orignial motor and doesn't run.They both need patch panels in the usually places.I ha
Hi i have two chevy pickups 48 and 53 that needs to be restored/hotrodded.Just couroius only at this piont has anyone here done or have instructions for making a convertible pickup or making it where
Just courious if anyone in the fla area was going to the Daytona Beach Turkey Rod Run? Its held at the Race track and its absolutely awesome, i try to go everyyear and i'm never disappionted.The whol
In the Oct issue of Classic Trucks page 146 there showing a pic of a bed of a chevy truck with a nice looking rubber matt with grove lines in it. Does anyone know where you can buy one of these? My t
Hi , over the weekend at a carshow i seen a old panel truck with a very small 110 volt ac mounted below the dash in the center.It was trim out nice with a custom face plate.He was showing it off but
HI Guys i have a holley carb that i'm trying to I.D. ( CFM ) these #s was on the Air Horn Area . Any ideas. Thanks in advance Steve Rushing R84013-1 3100 oletrucks is devoted to Chevy and GM trucks b
Hi i recently bought a 51 1/2ton pickup that has a small block with a standard 4 speed and it has a ford 9" rear with 373 rear gears i think. When you try to let the clutch out and take off i get som
I need fenders and running boards for my 51 1/2 ton.Who would be a good supplier with a good product? and who might i stay away from? It seems lead times are way out there for fiberglass parts and St
Hi , Does anyone know of a Ford forum site that is good as this site but for old ford pickups, now that i have a old 51 ford pickup along with my two chevys i kinda think i ought to ask my ford quest
Hi guys does any have any tips on mounting fiberglass rear fenders and fiberglass running boards to a 51 pickup 1/2 ton??? Rubber spacers and or rubber bushings? Should you connect the running boards
I have a slight lean at the rear of my 51 pickup 1/2 ton and i will be towing my boat sometimes,plus the shocks are wore out anyway, i thought about adding air shocks to the rear , any imput and or s
Is there a place that sells a bolt pattern template for the different wheel lug patterns? I stopped at a couple of tire stores in town and they didn't have any. I had a thick paper one for years but
What S-10 makes the very best donor Chassis ? Standard Cab ? Extended Cab? which combination works best short bed or long bed? Do blazer's work? if so 2 or 4 door? Is a cetain yr better than other? D
Do a lot of you Guys start out with old chevys with lots of body work ? With both lower cowl panels to replace and both rear cab corners to replace along wit other places in need of lots of repair i
A old ford truck question on a chevy truck site i know what to heck i'm i thinking. (don't shoot me)You guys have been so great about my two old chevys so i quess i'll just ask. I have a chance to bu
Hi Guys i tried finding a ford site for this answer with no help (wonder why i never liked a ford). Any way i bought a 1951 ford pickup that has a 1978 302 ford motor with a 4 speed standard and i've