- 1. Question for Late Model RBB (score: 1)
- Author: "Frank Krajewski" <frankk@intap.net>
- Date: Sun, 13 Jun 2004 13:05:29 -0400
- In working on my 1980 MGB LE I inadvertently disconnected a wire. I was replacing the external amplifier that mounts under the coil. On the forward mounting bolt is a diode or some kind of resistor o
- /html/mgs/2004-06/msg00297.html (8,335 bytes)
- 2. Re: Question for Late Model RBB (score: 1)
- Author: "Mike Janacek" <mjanacek@snet.net>
- Date: Sun, 13 Jun 2004 16:49:47 -0400
- Sounds like it's a noise suppressor. Mine is a blue color, about 1/2" diameter. If so it connects to the dual male positive spade at the coil. As to the clock, very strange. Have you checked voltage
- /html/mgs/2004-06/msg00301.html (9,163 bytes)
- 3. Re: Question for Late Model RBB (score: 1)
- Author: Betti Ann and Preston Smith <prsmith@ns.sympatico.ca>
- Date: Sun, 13 Jun 2004 18:02:57 -0300
- Frank et al! My 1980 MGB LE which is a US Federal Spec model does not have the device you mention. With the exception of a harness bracket the two external amplifier mounting bolts are bare The Moss
- /html/mgs/2004-06/msg00302.html (8,954 bytes)
- 4. Re: Question for Late Model RBB (score: 1)
- Author: "Don Vierling" <Don.Vierling@stago-us.com>
- Date: Mon, 14 Jun 2004 09:20:48 -0400
- I just noticed yesterday I have the same round blue thingy with one wire next to my coil (towards the front of the car). On the other side of the coil (towards the fire-wall) is what I think is the b
- /html/mgs/2004-06/msg00309.html (9,519 bytes)
- 5. Re: Question for Late Model RBB (score: 1)
- Author: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
- Date: Mon, 14 Jun 2004 17:00:25 +0100
- All MGBs with 6v coils and ballast resistances had the resistance as a length of resistance wire contained within the loom. US models with the 45DE4 distributor (attached) amplifier) also had a separ
- /html/mgs/2004-06/msg00317.html (7,930 bytes)
- 6. Re: Question for Late Model RBB (score: 1)
- Author: "Don Vierling" <Don.Vierling@stago-us.com>
- Date: Mon, 14 Jun 2004 12:17:55 -0400
- I have the original (but disconnected) 45DE4 with the integrated amplifier, so you're saying the aluminum resistor mounted next to the coil is for that? I'm assuming it's still a stock coil. Now, if
- /html/mgs/2004-06/msg00318.html (8,455 bytes)
- 7. Re: Question for Late Model RBB (score: 1)
- Author: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
- Date: Tue, 15 Jun 2004 11:30:29 +0100
- Don - that is what the additional resistor *should* be for. If you use a 12v coil you will have to connect a full 12v to the coil +ve instead of the ballasted connection from the white/light-green. W
- /html/mgs/2004-06/msg00323.html (9,482 bytes)
This search system is powered by
Namazu