- 1. XPAG head (score: 1)
- Author: Charlie Baldwin <ewsinc@BlazeNet.net>
- Date: Wed, 14 Oct 1998 20:48:09 -0400
- A friend of mine just dropped a valve in his TD. He says that it poked a hole in the head into the water jacket and the machine shop he took it to said it is not repairable. I have several questions:
- /html/mg-t/1998-10/msg00008.html (7,217 bytes)
- 2. Re: XPAG head (score: 1)
- Author: Leckstein <bleckstein@mail.monmouth.com>
- Date: Wed, 14 Oct 1998 09:49:22 -0400
- Charlie, I am usually wrong, but I think the answer to # 2 is yes, only the gasket must match. Mike T reg. 7094
- /html/mg-t/1998-10/msg00009.html (7,706 bytes)
- 3. Re: XPAG head (score: 1)
- Author: Bud Krueger <bkrueger@ici.net>
- Date: Wed, 14 Oct 1998 22:07:32 -0700
- From the Boston area you might try Rick Smith (of NEMGTR fame), his number is (781) 326-9055. He might be at The Boston MG Shop, (617) 731-2348. Last I knew, Rick was trying to unload parts. Good lu
- /html/mg-t/1998-10/msg00010.html (7,679 bytes)
- 4. RE: XPAG head (score: 1)
- Author: Lewis Palmer <lpalmer@vanstar.com>
- Date: Wed, 14 Oct 1998 19:29:07 -0700
- I don't know too much about the process, but I'll tell what I do know: 1) The T type head is made from cast iron, which makes is difficult to weld. I believe it can be welded by a specialist using a
- /html/mg-t/1998-10/msg00011.html (8,430 bytes)
- 5. Re: XPAG head (score: 1)
- Author: TATERRY@aol.com
- Date: Wed, 14 Oct 1998 23:44:03 EDT
- << 2) There are specialists who claim to be able to repair blocks and heads. I believe they call the process "metal stitching". There were a number of such outfits I used to see in England when we we
- /html/mg-t/1998-10/msg00012.html (7,492 bytes)
- 6. Re: XPAG head (score: 1)
- Author: John Swanland <jswanland@gw.wesley.vic.edu.au>
- Date: Thu, 15 Oct 1998 12:56:15 +1000
- I support everything that's been said to date. Should be plenty of heads around (I have a spare and could help out, but then I'm in Australia). There were some other makes (Morris/Wolesley?) that sha
- /html/mg-t/1998-10/msg00014.html (6,857 bytes)
- 7. Re: XPAG head (score: 1)
- Author: Charlie Baldwin <ewsinc@BlazeNet.net>
- Date: Sat, 17 Oct 1998 15:18:05 -0400
- Thanks to all who responded to my questions above: Mike Leckstein, Bud Krueger, Lewis Palmer, John Swanland, Terry Sanders, Dave DuBois, Jarl deBoer, Bob Grunau, Bob Howard, and Blair Engle. I will p
- /html/mg-t/1998-10/msg00023.html (7,985 bytes)
This search system is powered by
Namazu