Bob, based on my experience it won't take you 2-3 years to know how that
paint holds up. It chips and wears very easily, and has a "nice" life of
about one to two weekends in the cockpit of my sports racer. It didn't
survive adjusting the belts, actually, which involves installing the seat a
half dozen times with Willans 6 point belts.
Brian
At 12:06 PM 10/4/01 -0400, Bob Schmitt wrote:
>Hi All -
>
>The alternative is Krylon "Rust Tough" Light Machinery Gray (ASA-61), stock
>number 00839 from http://www.morcon-ind.com/paints.htm and probably many
>other suppliers, in 15 oz. aerosol cans. That's probably what I'll use and
>will be glad to send a report in 2-3 years!
>
>Bob
>
>Subject: Re: Gray -Interior and Chassis Paint
>
>
> > Looks like this might be it:
> > http://www.zynolyte.com/zynopages/rustmaster.html
> >
> > It's Rustmaster Epoxy paint and Epoxy Primers. Good selection of colors.
> > I'm going to try it.
> >
> > Jim
> > ----- Original Message -----
> > From: "Derek Harling" <derek.lola@home.com>
> > To: "Carl Braun" <clbraun@mwci.net>
> > Cc: "David Bondon" <david.bondon@mindspring.com>; "Bob Schmitt"
> > <bob.schmitt@sainthood.com>; "Vintage Race" <vintage-race@autox.team.net>
> > Sent: Wednesday, October 03, 2001 1:31 PM
> > Subject: Re: Gray -Interior and Chassis Paint
> >
> >
> > > OK Carl
> > >
> > > I've just been to http://www.zynolyte.com and the only epoxy paint they
> > mention is Klenk's
> > > Appliance Enamel - for baths and appliances - is this what you use? It
> > comes in black, white and
> > > almond.
> > >
> > > But it's not called Rust-Mate. There is a Rust Master - but this is not
> > described as epoxy.
> > >
> > > Can you elucidate further please.
> > >
> > > Derek - (getting near to paint time)
> > >
> > >
> > > Carl Braun wrote:
> > >
> > > > The following product which has been recommended time and again by
> > vintage
> > > > racers. Zynolyte Epoxy Rust-Mate is the product to search out. Be
>sure
> > to
> > > > use the epoxy. It is very hard and very durable. I use the black
> > > > extensively and it is the closest thing to powder coat I know of.
> > >
> > > ///
> > > /// vintage-race@autox.team.net mailing list
> > > /// Send admin requests to majordomo@autox.team.net
> > > /// or go to http://www.team.net/cgi-bin/majorcool
> > > /// Send list postings to vintage-race@autox.team.net
> > > ///
> >
> > ///
> > /// vintage-race@autox.team.net mailing list
> > /// Send admin requests to majordomo@autox.team.net
> > /// or go to http://www.team.net/cgi-bin/majorcool
> > /// Send list postings to vintage-race@autox.team.net
> > ///
>
>///
>/// vintage-race@autox.team.net mailing list
>/// Send admin requests to majordomo@autox.team.net
>/// or go to http://www.team.net/cgi-bin/majorcool
>/// Send list postings to vintage-race@autox.team.net
>///
Brian Evans
Director, Canada
MCI Wholesale Internet Services
///
/// vintage-race@autox.team.net mailing list
/// or go to http://www.team.net/cgi-bin/majorcool
///
|