vintage-race
[Top] [All Lists]

Go Faster Parts/Tech Info

To: vintage-race@autox.team.net
Subject: Go Faster Parts/Tech Info
From: Gary Speckman <speckman@coredcs.com>
Date: Thu, 25 May 2000 06:17:51 -0500
>From Jim Donato:

To All , 
        The Team Thicko  R&D  department is now starting to open up a Big
O'ld Can Of Whoop Ass on all the high $$$$ SOB's. 

I have aluminum Flywheels about to be done. 
Sprite/ Midget 1275 or 948 for 3-4-weeks out  $ 302.00 + s/h 
TR-6 are now ready for only    $ 318.00 +s/h 
TR-3/4A  4-5-weeks out  for only  $ 318.00 + s/h 
Spitfire 1300, 1500, MG B, MG A, some now ready 
working on Lotus Europa Renault too 
Also just about anything V-8's, to Neon too


Tech Specs of above:
These are high performance flywheels, made from 6061-T6 alum, Which
is better than the 7075 because the 6061-T6 is heat treated and is much
stronger at working temp (about 180-220 ' ), the clutch surface is 1050
high carbon alloy that ia heat treated allthe way so you can machine the
surface later, they are rivited with stainless 3040 rivits, and can take
the production clutch. rings are attached with 3 grade 10 button rivits. 

Also in the works The Best Comp axles for Sprite's/ midgets
A limited slip diff for Sprite's/midgets all A-series diff's, and MG B
to.  My Goal is to keep the price and the lap times low. 
I will have Flywheels to see at blackhawk. 
I want all TT members and such to get the first run at these.
To help all I am running this through my Jeep Dealership so I can take
plastic M/C, Discover, Visa. 
let me know if any interest 
Please help by posting this to other lists  
Thanks 
Jim (Elmo) D





<Prev in Thread] Current Thread [Next in Thread>
  • Go Faster Parts/Tech Info, Gary Speckman <=