I'm in need of the clevis bolt for the rear upright on my Titan MK-6 Formula
Ford. The bolt or stud end is 3/8 x 24 with a grip of 2.5" and a thread
length of 1.0". A 3/8 rod end fits into it so there is a 3/8" hold and the
opening for the rod end is ½".
The stud end on one my current clevis bolts is bent and will not push into
the upright. I've heard of people repairing these by cutting the stud off
then drilling and tapping and inserting a new stud. Not sure if this is a
safe repair.
Roger J. Karnopp
MK-6 Titan FF
|