vintage-race
[Top] [All Lists]

Re: Block/Liner Question

To: Malaboge@aol.com
Subject: Re: Block/Liner Question
From: BFE KEN G <BFEKENG@aol.com>
Date: Fri, 31 Oct 1997 09:23:28 EST
IRV, On some engines (TR-6) a composition gasket is used which is thicker
than the shim steel most 4cyl TR racers.In adition a generous amount of
original deck height is also provided.To get maximum compression it becomes
necessary to zero deck the block & rely on the thicker gasket for clearance
 The piston & rod combo stretch on all engines proportional to the rpm &
we are back to no two things in the same place at the same time bit.

                                                  KEN G.

<Prev in Thread] Current Thread [Next in Thread>