Howdy;
240Z rear drums are finned aluminum (very similar to the set that TRF
sells for TR6s) with steel inserts. I have used them in a TR6 racing
application for 3 years - great results.
To my knowledge they are EXACTLY the same size as a TR6 rear drum, same
bolt pattern, depth, width, etc. only need a small amount of machining
to enable the drum to clear the stock backing plate on a TR6.
PS J.K. Jackson in Florida has excellent advice in this and other areas
concerning TR6s.
R. Scott Stacey
Prince George
ph (604) 563-9348
fax (604) 563-6248
>----------
>From: Dr G W Owen[SMTP:ensgwo@bath.ac.uk]
>Sent: Wednesday, October 16, 1996 8:54 AM
>To: Jack W. Drews
>Cc: Hctcbob@aol.com; triumphs@autox.team.net; vintage-race@autox.team.net
>Subject: Re: TR3A racecar parts wanted
>
>
>What diameter are 240Z drums? They might be ggod to fit on all sorts of
>things!!!!
>
>Geraint
>
>
|