tvr
[Top] [All Lists]

RE: Vixen Turbine Wheels

To: "'TVR mailing list'" <tvr@autox.team.net>,
Subject: RE: Vixen Turbine Wheels
From: "Hill, Stephen M EDUC:EX" <Stephen.Hill@gems7.gov.bc.ca>
Date: Mon, 10 Jul 2000 12:52:07 -0700
Perfect. So which is closer to the original tire diameter? (Diameter, not
width or sidewall height)
 
205/60-15  at 24.7 inches diameter or
205/65-15 5.2 at 25.5 inches 

Stephen

> ----------
> From:         Rolf Beuttenmuller[SMTP:rolf@bnl.gov]
> Sent:         Monday, July 10, 2000 12:41 PM
> To:   Hill, Stephen M EDUC:EX; 'TVR mailing list'
> Subject:      Re: Vixen Turbine Wheels
> 
> I have the orriginal wheels and I actually have one with the original tire
> and after thirty years it still has air in it.
> 
> Rolf 70 Vixen
> 
> ----- Original Message -----
> From: Hill, Stephen M EDUC:EX <Stephen.Hill@gems7.gov.bc.ca>
> To: 'TVR mailing list' <tvr@autox.team.net>
> Sent: Monday, July 10, 2000 12:01 PM
> Subject: Vixen Turbine Wheels
> 
> 
> > Does anybody on the list have a TVR where the tires are installed on the
> > original aluminum turbine wheels without using tubes?  I recall being
> told
> > years ago these wheels were not designed for tubeless tires, and that an
> > inner tube was necessary. I was recently told by a tire shop that they
> can
> > install tubeless tires on the rims without inner tubes (they had not
> seen
> > the rims). Comments?
> >
> > Stephen
> > 1972 2500
> 
> 

<Prev in Thread] Current Thread [Next in Thread>