Hi All,
Iâ??m now trying to adjust the camber on the rear wheels of my TR6.
After changing out he bushings Iâ??m finding that the drivers side is within
spec, but the passenger side is 3/1/2 degrees negative reinstalled the original
trailing arm brackets in the original configuration. I had installed adjustable
trailing arm brackets about 10 years ago, but when I inspected them this spring
the bushings were really destroyed. Iâ??m not sure that the damage was due to
crappy bushings or that the adjustable brackets were causing a problem.
Although the stock brackets are simple, figuring out how to configure the
brackets to get the camber right is much more difficult than adjusting the
adjustable brackets. Has anyone who has installed adjustable trailing arm
brackets had a similar experience?
Best,
Bob
â??72 TR6
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|