Bob, you might contact Joe Curto? He rebushed and fitted new throttle shafts in
my SUâ??s several years ago and it was less than $300.00. Plus he has done it
before (grin)
Dave Connitt
Sent from my iPhone
> On May 12, 2020, at 6:27 PM, Bob Leaver <boleaver@gmail.com> wrote:
>
> I have a 1965 Triumph TR4a that I rebuilt the SU carbs and now I can't
> get the idle below about 1500. I've tried all the screws and checked
> all gaskets and nothing. The only possibility I can come up with is
> air getting around the shafts. When rebuilding the cars I didn't
> replace the shafts because I didn't have a reamer. Moss has a reamer
> for $290.00. I looked on line and can't find a less expensive
> replacement. The book states the size of the reamer is 5/16" +
> 0.0105". What kind of measurement is this? Can you use a 5/16" reamer?
> Does anyone have ideas how I can get the idle down? Does anyone know
> of a cheaper reamer to use? Thanks, Bob
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/dconnitt@fuse.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|