triumphs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TR] slightly higher sitting nut?

from [Randall] [Permanent Link][Original]
To: "'Paul Dorsey'" <dorpaul1@gmail.com>, "'Wbeech@flash.net'" <wbeech@flash.net>
Subject: Re: [TR] slightly higher sitting nut?
From: "Randall" <tr3driver@ca.rr.com>
Date: Tue, 25 Sep 2018 12:07:01 -0400
Cc: "'Triumph list Team.net'" <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <CAFU8DPu2Tr0Vgdecys9pOHExOnGpEs3eKkGotM-5S5P5nJPfTw@mail.gmail.com> <4A030822-157D-4324-A241-1AF7F566C37C@flash.net> <CAFU8DPudDGEv8M-JW33WeTZNyyBfFM_ObS4vd2EJq_zFjJMF-w@mail.gmail.com>
Thread-index: AdRU4RUp7/AYMuRCR7uhYJAbb1vzogACIdOQ k2nVdxiIwB7GBezjKgazY5xi01179GYHM501YcnKkEK4PJNGlV58y/nUtTvUWKzVd/j6cGiuUxtRxwr/J9eRpd50eUBiWrRJdVbGG2DUxB+1hZHXmn5j8Aqf 
> Thanks!What do you think the torque value might be?

The workshop manual calls for 25 ft-lb.

-- Randall  

** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TR] slightly higher sitting nut?, Rye Livingston
Next by Date:  Re: [TR] slightly higher sitting nut?, Paul Dorsey
Previous by Thread:  Re: [TR] slightly higher sitting nut?, Rye Livingston
Next by Thread:  Re: [TR] slightly higher sitting nut?, Paul Dorsey
Indexes:  [Date] [Thread] [Top] [All Lists]