One other thing - the clutch makes a difference in motor mount
longevity.? If you have one of those toggle switch clutches, engaging
the clutch is very abrupt and I thought it was one reason I broke motor
mounts initially.? I went to a more forgiving clutch in addition to
getting heavy duty mounts from Cambridge UK (which are probably the Land
/ Range Rover mounts).
Tony Drews
On 6/6/2018 8:45 AM, van.mulders.marcel--- via Fot wrote:
> I bought these mounts on an oldtimer show in the UK. The are? probably
> from a Land Rover, not a Range Rover. Height is about
> 1".
> PS : Dont forget that the gearbox mount is more important than the
> engine mounts to keep the engine from moving forward and rearward!
>
> ------------------------------------------------------------------------
> *Van: *"Alec Buchan" <agb at compsnw.com>
> *Aan: *fmccjr at aol.com, "van mulders marcel"
> <van.mulders.marcel at telenet.be>
> *Cc: *"fot" <fot at autox.team.net>
> *Verzonden: *Woensdag 6 juni 2018 15:39:23
> *Onderwerp: *Re: [Fot] Beaten by equipment...Pacific NW edition.
>
> The Land Range Rover (1987-1995) look just like the round TR4 mounts.
> Did you use these or modify others?
>
> Thanks.
>
> On 6/6/2018 6:35 AM, fmccjr at aol.com wrote:
>
> My car (TR3) has square tube steel mounts, capped on one side... they
> are a pain to tighten, but there will be no chance the engine will drop.
>
> Everything else on the car...another story!
>
> Rick McCurdy
> Newburgh, NY
>
> On Jun 6, 2018, at 4:02 AM, van.mulders.marcel--- via Fot<fot at
> autox.team.net> wrote:
>
> I fitted Land Rover engine mounts, and a fixation at the top of the
> engine. The engine mounts of an off road car are supposed to be very strong.
> Marcel
>
> ----- Oorspronkelijk bericht -----
> Van: "fot"<fot at autox.team.net>
> Aan: "fot"<fot at autox.team.net>
> Verzonden: Woensdag 6 juni 2018 02:47:41
> Onderwerp: [Fot] Beaten by equipment...Pacific NW edition.
>
> I've got an issue...lots of issues, but this refers to my TR4.
>
> Raced in my first event of the year this past weekend at the Spokane
> Festival of Speed (SOVREN)
>
> Car did well but in my third session, going down the back straight,
> over
> a couple bumps, my throttle went wide open 'on its own'. Once back in
> the paddock, we found that both front engine mounts had failed and the
> engine dropped below the mount on the carburetor side, forcing the
> throttle to its maximum position.
>
> These were brand new mounts as one failed at our Fall Finale, last
> September in Seattle. Also, these two events are the only events I
> have
> run my 'spare' motor which I picked up in CA last year. Engine seems
> to
> do well but the combination of its torque, combined with the quality
> of
> the mounts, is very frustrating. I tried to take a photo of how it
> currently sits, but couldn't focus well enough. I am running the round
> mounts, "Engine Mount Uprated TR4 TR4A (SKU 130985)" from a PNW
> supplier. Three mounts in two events is not a good pattern.
>
> Any thoughts or alternatives is greatly appreciated.
>
> Alec Buchan
> aka the Blue Caboose.
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate:http://www.team.net/donate.html
> Archive:http://www.team.net/pipermail/fot
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/fot/van.mulders.marcel
> at telenet.be
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate:http://www.team.net/donate.html
> Archive:http://www.team.net/pipermail/fot
> Unsubscribe/Manage:http://autox.team.net/mailman/options/fot/fmccjr
> at aol.com
>
>
>
> --
>
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at
> tonydrews.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180606/6840df8e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: emailsignature4.jpg
Type: image/jpeg
Size: 22639 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/fot/attachments/20180606/6840df8e/attachment.jpg>
|
