triumphs
[Top] [All Lists]

[Fot] Adding type A OD

Subject: [Fot] Adding type A OD
From: gblake58tr3 at icloud.com (Greg Blake)
Date: Wed, 21 Feb 2018 21:26:20 -0600
References: <1463085899.1918537.1519217663676@mail.yahoo.com> <161b9373f28-c88-3d0a1@webjas-vac036.srv.aolmail.net> <006101d3ab42$16160750$424215f0$@att.net>
Mike this is awesome, exactly what I was looking for. 

All of the other responses were informative as well. I love this group. 

Thanks. 

Greg

Sent from my iPhone

> On Feb 21, 2018, at 12:30 PM, M&M Hado via Fot <fot at autox.team.net> wrote:
> 
> Yes, it?s annoying to me, also, when you forget to manually turn off the 
> overdrive and then have it engage when going back into gear.  There are at 
> least a couple ways to have it drop out when passing through neutral.  Here?s 
> what I think is the easiest and is what I have on my TR4A:
>  
> https://www.revingtontr.com/engine-transmission/gearbox/logic-overdrive-device
>  
> If you want to do it yourself, you can also make the same functionality with 
> a couple of DPDT relays per the attached diagram that I made up a few years 
> ago for my TR3B because I kept forgetting to manually turn of the O.D.
>  
> Mike
>  
>  
> From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Steve Smith via 
> Fot
> Sent: Wednesday, February 21, 2018 10:34 AM
> To: jwheeler1947 at yahoo.com; fot at autox.team.net
> Subject: Re: [Fot] Adding type A OD
>  
> I DO NOT like the on-off toggle switch for the OD's as I would downshift out 
> of OD and forget to toggle the switch to off so I went back into OD as soon 
> as the third gear switch was reengaged.  To combat this I used a standard 
> electrical control scheme called "Three wire control" to engage the OD relay 
> but drop it out when the shifter switch opened.  To re-engage overdrive a 
> pushbutton would activate the relay and latch itself in so the pushbutton was 
> just momentary.  Does that make sense?  I can do a drawing if not clear.   
> Steve
> 
> 
> 
> -----Original Message-----
> From: Jack Wheeler via Fot <fot at autox.team.net>
> To: Greg Blake via Fot <fot at autox.team.net>
> Sent: Wed, Feb 21, 2018 8:12 am
> Subject: Re: [Fot] Adding type A OD
> 
> For all of my 24 years of SCCA racing, I had the O/D switch mounted on my 
> shift lever.  Very convenient, and allowed for faster shifting.
>  
> Jack Wheeler
>  
>  
> On Wednesday, February 21, 2018, 4:14:18 AM EST, Greg Blake via Fot <fot at 
> autox.team.net> wrote:
>  
>  
> Looking for what Bosch relay I could substitute for the standard Lucas part 
> number. Originally is not an issue as this is under the dash in my race car.
>  
> Also looking for advice on OD switch location for the race car. What do you 
> guys like to use?  I was thinking a button on the steering wheel or on the 
> shifter must be convenient.
>  
> Appreciate the ideas.
>  
> Greg
>  
> Sent from my iPhone
> _______________________________________________
> fot at autox.team.net
>  
> http://www.fot-racing.com
>  
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947 at 
> yahoo.com
>  
>  
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gt6steve at 
> aol.com
> 
> 
> <Overdrive Lockout Wiring.pdf>
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gblake58tr3 at 
> icloud.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180221/43bc5ee7/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>