--===============8941582595322095036==
boundary="----=_Part_12656803_1805203785.1438277281142"
------=_Part_12656803_1805203785.1438277281142
Content-Transfer-Encoding: 7bit
One more thing...if you have a frame that's slightly bent it can be
straightened, but media blast it and check closely for rust and cracks where
the lower A-arms inner pivot attaches to the frame.
The cracks are common and difficult to see. Many years with an out of balance
wheel can cause cracks besides the impact that caused the bent turret.
These frames rust from the inside out. Media blasting can reveal pin holes you
will not otherwise see and the cracks.
Dave
----- Original Message -----
From: "Hoyt Duff" <hoytduff@gmail.com>
To: "Triumph List" <triumphs@autox.team.net>
Sent: Thursday, July 30, 2015 9:22:59 AM
Subject: [TR] TR2 with TR6 front suspension
On 7/28/15, Dan Cronin <adcronin@mi.rr.com> wrote:
> Am putting the up-rated stub axle kit on my TR2 with TR6 front suspension /
How does one update the front suspension in that manner? I have a very
soild TR3 frame with a twisted RH turret.
Since I must have that repaired, is it worthwhile to upgrade?
--
Hoyt
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
------=_Part_12656803_1805203785.1438277281142
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: Arial; font-size: 12pt; color: #0000=
00"><div>One more thing...if you have a frame that's slightly bent it can b=
e straightened, but media blast it and check closely for rust and cracks wh=
ere the lower A-arms inner pivot attaches to the frame. <br></div><di=
v>The cracks are common and difficult to see. Many years with an out =
of balance wheel can cause cracks besides the impact that caused the bent t=
urret.</div><div>These frames rust from the inside out. Media blastin=
g can reveal pin holes you will not otherwise see and the cracks. </d=
iv><div><br></div><div>Dave</div><div><br></div><hr id=3D"zwchr"><div style=
=3D"color:#000;font-weight:normal;font-style:normal;text-decoration:none;fo=
nt-family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From: </b>"Hoyt Du=
ff" <hoytduff@gmail.com><br><b>To: </b>"Triumph List" <triumphs@au=
tox.team.net><br><b>Sent: </b>Thursday, July 30, 2015 9:22:59 AM<br><b>S=
ubject: </b>[TR] TR2 with TR6 front suspension<br><div><br></div>On 7/28/15=
, Dan Cronin <adcronin@mi.rr.com> wrote:<br>> Am putting the up-ra=
ted stub axle kit on my TR2 with TR6 front suspension /<br><div><br></div><=
br>How does one update the front suspension in that manner? I have a very<b=
r>soild TR3 frame with a twisted RH turret.<br><div><br></div>Since I must =
have that repaired, is it worthwhile to upgrade?<br><div><br></div>-- <br>H=
oyt<br><div><br></div>** triumphs@autox.team.net **<br><div><br></div>Donat=
e: http://www.team.net/donate.html<br>Archive: http://www.team.net/archive<=
br>Forums: http://www.team.net/forums<br>Unsubscribe/Manage: http://autox.t=
eam.net/mailman/options/triumphs/dlhogye@comcast.net<br></div><div><br></di=
v></div></body></html>
------=_Part_12656803_1805203785.1438277281142--
--===============8941582595322095036==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
--===============8941582595322095036==--
|