Take a look at the schematics posted here.
http://www.advanceautowire.com/schematics.htm
The diagram on Ohoto Bucket was too confusing.
Greg G.
Osseo, MN
> The project is moving along.. ran into a 'stumper' this afternoon.
>
>
>
> See
> http://s1001.photobucket.com/user/cfmtr3a/media/TR3AwiringCM_16LampCircuitSM
> ALL.png.html (email if problems viewing it)
>
>
>
> I have all wired as in the link - but nothing happens when I flip the
> switch.
>
> Checked the fuses - ok
>
> Checked juice from the switch - ok
>
> Checked the live wire going into the fuse block - ok
>
>
>
> But no lights.
>
>
>
> Wires feed into standard H/L pigtail.
>
> Grounded at Horn Tower connection. Just in case - put a jumper from
> ground
> lead directly to battery - no difference.
>
>
>
> Anything wrong with my schematic?
>
>
>
> Next step is to disconnect at relays and bypass - but I can't believe that
> both relays are bad.
>
>
>
> Any insight is appreciated..
>
>
>
>
>
> Carl
>
> 1961 Triumph TR3A - TS81802LO
>
> <http://mysite.verizon.net/cfmtr3a/> http://mysite.verizon.net/cfmtr3a/
>
> Still being restored - but 2013 looks like the year..
>
> Tampa, FL
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/greg@gelhar.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|