mm+Millimeter, about 1 inch, so more than double your noted amount. Guess
I'll buy a new chain.
TRF lists three different qualities of timing chains:
1. AE brand $19.95
2. Replica $9.95
3. Renold $48.93
Or, Moss just lists one at $9.95
Just for the weekend driver, does anyone have any expereince with these?
Thnaks,
Bill
_____
From: Geo Hahn [mailto:ahwahneetr@gmail.com]
Sent: Monday, January 28, 2013 6:21 PM
To: Wbeech
Cc: triumphs@autox.team.net
Subject: Re: [TR] TR3B timing chain slack
Bill -
I know this is in the manual somewhere -- but couldn't find it just now.
But my notes from the last time I did this say "per manual, slack of < 0.4"
is acceptable".
What's a mm?
Geo
On Mon, Jan 28, 2013 at 4:25 PM, Wbeech <wbeech@flash.net> wrote:
What is an acceptable amount of slack in the TR3B (TCF) timing chain? With
all the slack on the tensioner side I can measure 25mm of play. Is this OK?
Thanks,
Bill;
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|