Re: [TR] TR3 carb bushings

["Randall" <TR3driver@ca.rr.com>]

> What they don't tell you is that the new shafts are not drilled for the
> pins that locate the throttle stops.

I forgot to mention: Drill for the pins _before_ you cut the shaft to
length.  That way, if you goof, you can turn the shaft end-to-end and try
again.  The extra hole will be hidden under the spring, and won't hurt
anything.  Don't forget to deburr the hole (both sides) before doing a trial
fitting.

Randall

** triumphs@autox.team.net **

Archive: http://www.team.net/archive