Could the seal be installed upside down or inside out? The curve (as George
says) should be pointed away from the glass and out from the channel.
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Geo Hahn
Sent: Monday, October 15, 2012 3:10 PM
To: G.D. Huggins
Cc: Triumphs
Subject: Re: [TR] Window outer seal issue
Perhaps the 4A is different but I don't think the TR4 had any fuzz on the
outer seal, just plain rubber that presses and curves up a bit against the
glass.
Geo
On Mon, Oct 15, 2012 at 11:37 AM, G.D. Huggins <GUY@genfiniti.com> wrote:
> Unlike the seal I had before, these seals from Moss have no "fuzz",
> which allows the glass to glide nicely.
>
> Any advice other than to replace the seal with one that has fuzz?
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net
|