would you happen to have a template or dimensioned drawing?
Frank
From:
Hdefer <tr3 at roadrunner.com>
To: Triumph List <triumphs at autox.team.net>
Sent:
Tuesday, March 13, 2012 3:30 PM
Subject: Re: [TR] Tonneau cover for TR3 /
early TR3A
Randall, I had the same problem with that tonneau from Moss.
Unfortunately, it came with the "package" I bought from the previous owner who
had started renovation. I am planning to do the same as I did with my 190SL
and have it custom made locally. It was far superior in quality and actually
much cheaper.
If interested I'll be happy to provide you with details
Hans
On Mar 12, 2012, at 2:10 PM, Randall wrote:
> I have been unhappy with the
fit of tonneau covers from both Moss & TRF.
> None of them are cut large
enough to reach all of the original studs, either
> on my previous early TR3A
or my current TR3.
>
>
>
> I strongly suspect this is partly due to the
studs moving around when the
> Dzus-button side curtains were introduced.
Only TRF even shows a break in
> tonneau part numbers at that point (TS28xxx),
but their "early" vinyl cover
> didn't fit my car either. I had to completely
skip the front corner studs,
> and it was so tight over the remaining studs
that the zipper has failed
> after only 2 years of use (and only occasionally
snapping the studs on the
> driver's side).
>
>
>
> Has anyone with a LHD
TR3 bought a tonneau cover that actually fit?
>
>
>
> -- Randall
> **
triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/tr3 at roadrunner.com
**
triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/yellowtr3 at yahoo.com
|