imho leave well enough alone, but bypass it. I've always thought it was
silly since as others have pointed out its rather useless. mine is
bypassed.
--------------------------------------------------
From: "Joseph Laurito" <trglory@verizon.net>
Sent: Friday, February 03, 2012 12:49 PM
To: <triumphs@autox.team.net>
Subject: Re: [TR] Panel switch - TR3
> It's hard to find a TR3 with a push-pull switch except for show cars; most
> have been retrofitted with the rheostat. I can't figure out why, though,
> because the dash lights are pretty dim at full power and after the
> resistor
> wire gets a little corroded the dash goes dark every time you hit a bump.
> Don't know if the push-pull switch will fit in the d-shaped hole, but if
> you
> find out, let us know.
>
> Joe
>
> -----Original Message-----
> From: triumphs-bounces@autox.team.net
> [mailto:triumphs-bounces@autox.team.net] On Behalf Of Andrew Uprichard
> Sent: Friday, February 03, 2012 12:29 PM
> To: triumphs@autox.team.net
> Subject: Re: [TR] Panel switch - TR3
>
> Thanks to all who replied. The consensus is that a previous owner
> converted
> the car to use a centrally located rheostat (got a panel with the larger,
> D-shaped, hole). I need to decide whether to leave alone or go back to
> the
> on-off system.
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|