Subject: | [TR] TR4 Question |
---|---|
From: | TR3driver at ca.rr.com (Randall) |
Date: | Sun, 15 Jan 2012 20:10:38 -0800 |
References: | <67FCF742-9FD3-48FD-8015-624FA8595892@citlink.net> |
My suggestion, next time it happens, put a voltmeter or test lamp directly across the starter, from the big terminal with the heavy wire to the starter housing. If the starter is getting at least 6 volts (the lamp lights reasonably bright), the problem must be inside the starter. My Stag had a very similar problem, which turned out to be burned (bad) segments on the starter commutator. It would work fine unless it just happened to stop with a brush on a bad segment. -- Randall |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TR] TR4 Question, Randall |
---|---|
Next by Date: | Re: [TR] Inquiring minds - reverse-o/d selector switches, Randall |
Previous by Thread: | Re: [TR] TR4 Question, Randall |
Next by Thread: | Re: [TR] TR4 Question, John Macartney |
Indexes: | [Date] [Thread] [Top] [All Lists] |