Bill,
Did you measure the diameter of your crankshaft pulley? I have a new stock
one down in the garage. I will measure it tomorrow and let you know what I
come up with. I imagine all the stock pulleys are the same diameter. I
thought it was pretty interesting how the punched hole in the pulley was off
so much from actual TDC. Of course that assumes that the gentleman's
technique was that accurate..
I will let you know tomorrow on the diameter and what each degree works out
to but it sounds like you are pretty close.
Dave Connitt
----- Original Message -----
From: <wbeech@flash.net>
To: "'Dave Connitt'" <dconnitt@fuse.net>; <triumphs@autox.team.net>
Sent: Saturday, January 14, 2012 6:44 PM
Subject: RE: [TR] Shade tree Timing
> Dave,
> This is it, thanks. So, assuming the mark on my wheel is TDC, 4 degrees =
> 4.8mm or .189" or 3/16".
>
> Can someone check my math?
>
> Thanks,
> bill
>
> -----Original Message-----
> From: Dave Connitt [mailto:dconnitt@fuse.net]
> Sent: Saturday, January 14, 2012 5:17 PM
> To: wbeech@flash.net; triumphs@autox.team.net
> Subject: Re: [TR] Shade tree Timing
>
> Bill,
> I came across this link awhile back regarding locating TDC on an assembled
> engine and then deterimining where to put the timing mark.
>
> http://tr4triumph.blogspot.com/search?updated-min=2011-01-01T00%3A00%3A00Z&u
> pdated-max=2012-01-01T00%3A00%3A00Z&max-results=6
>
> It seems like it would work but I haven't tried it.
>
> Regards,
> Dave Connitt
> '67 TR4A IRS
> http://home.fuse.net/davestr4a
>
>
> ----- Original Message -----
> From: <wbeech@flash.net>
> To: <triumphs@autox.team.net>
> Sent: Saturday, January 14, 2012 4:19 PM
> Subject: Re: [TR] Shade tree Timing
>
>
>> Not having marked my pulley with a degree wheel when I had it apart a few
>> years back, I am trying to guestimate what 4 degrees BTDC looks like in
>> terms of inches/millimeters.
>>
>> I am kind of thinking that if the TDC mark flashes about 1/4-3/8 before
>> the
>> pointer that I am pretty close. Has anyone ever put a ruler to this
>> before?
>>
>> Best,
>> Bill
>>
>> Bill Beecher
>> '58 TR-3A TS30766L "Tarbaby"
>> www.triumphowners.com/1566
>> "A Triumph is man's best friend, it always comes when it is called...of
>> course, some times it is difficult to make it go"
>>
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/dconnitt@fuse.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|