Bill,
I came across this link awhile back regarding locating TDC on an assembled
engine and then deterimining where to put the timing mark.
http://tr4triumph.blogspot.com/search?updated-min=2011-01-01T00%3A00%3A00Z&updated-max=2012-01-01T00%3A00%3A00Z&max-results=6
It seems like it would work but I haven't tried it.
Regards,
Dave Connitt
'67 TR4A IRS
http://home.fuse.net/davestr4a
----- Original Message -----
From: <wbeech@flash.net>
To: <triumphs@autox.team.net>
Sent: Saturday, January 14, 2012 4:19 PM
Subject: Re: [TR] Shade tree Timing
> Not having marked my pulley with a degree wheel when I had it apart a few
> years back, I am trying to guestimate what 4 degrees BTDC looks like in
> terms of inches/millimeters.
>
> I am kind of thinking that if the TDC mark flashes about 1/4-3/8 before
> the
> pointer that I am pretty close. Has anyone ever put a ruler to this
> before?
>
> Best,
> Bill
>
> Bill Beecher
> '58 TR-3A TS30766L "Tarbaby"
> www.triumphowners.com/1566
> "A Triumph is man's best friend, it always comes when it is called...of
> course, some times it is difficult to make it go"
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/dconnitt@fuse.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|