It should run over the top of the tranny to the passenger side.
They had a circle clip that held on the tranny and then
it was a stright shot to the right angle drive.
Al
----- Original Message -----
From: "James Henningsen" <trguy at cfl.rr.com>
To: <triumphs at autox.team.net>
Sent: Sunday, November 20, 2011 11:52 AM
Subject: [TR] TR6 Speedo Cable Routing
> Ok, I am getting old and forgot the correct routing for the speedo cable
> to
> the jtype od tranny right angle drive. The cable is attached to the
> speedo
> and runs through the firewall down through the hole and is currently
> running
> under the slave cylinder and tranny to the right angle drive. The problem
> is that it rests on the exhaust pipes. Isn't there supposed to be a clip
> attached to one of the tranny mounting screws to the rear engine that the
> cable runs through to keep it lifted off the exhaust?? Any help would be
> appreciated.
>
> Thanks,
>
> Jim Henningsen
>
> Maitland, FL - soon to be Ocala, FL
>
> 75 TR6
>
> 62 TR4
>
>
> triumphs at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/tr6parts at charter.net
|