triumphs
[Top] [All Lists]

[TR] TR6 Speedo Cable Routing

To: <triumphs@autox.team.net>
Subject: [TR] TR6 Speedo Cable Routing
From: "James Henningsen" <trguy@cfl.rr.com>
Date: Sun, 20 Nov 2011 11:52:08 -0500
Ok, I am getting old and forgot the correct routing for the speedo cable to
the jtype od tranny right angle drive.  The cable is attached to the speedo
and runs through the firewall down through the hole and is currently running
under the slave cylinder and tranny to the right angle drive.  The problem
is that it rests on the exhaust pipes. Isn't there supposed to be a clip
attached to one of the tranny mounting screws to the rear engine that the
cable runs through to keep it lifted off the exhaust??  Any help would be
appreciated.  

Thanks,

Jim Henningsen

Maitland, FL - soon to be Ocala, FL

75 TR6

62 TR4


triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>