Craig,
If you have a good thermometer you should run the engine until you think
it should be hot and then carefully open the rad cap and stick in the
probe. Should be about what your thermostat is rated or a bit higher.
If the temperature is what you think it should be, I would replace the
sensor next.
Bob
On 11/07/2011 09:23 AM, thenicholls at verizon.net wrote:
> Replaced thermostat yesterday, no change in temp gauge reading. Where should
> I head to next?
>
> Craig
> 1972 Triumph TR6
>
>
> Oct 29, 2011 12:47:51 AM, thenicholls at verizon.net wrote:
>
> Don't know, I could replace it. Any way to test that? I did replace it
> 4/1/2006, that could be it.
>
> Thanks,
>
> Craig
>
>
> Oct 28, 2011 11:52:24 PM, fishplate at charter.net wrote:
>
> On 10/28/2011 10:16 PM, thenicholls at verizon.net wrote:
>> Is it possible for an engine to run too cold? I had never thought this was a
>> concern.
> `
> Yes, but it's not likely to be the plugs. Is your thermostat stuck open?
|