Re: [TR] tr3A Front Apron

[<wbeech@flash.net>]

<I mention all this in case anyone has a good technique for drilling after
painted....>Geo


MY TIP:
I used a small spot of clear silicon under each letter, on each pin and then
on the back over the speed nuts.  Besides sealing, it has the added
advantage of keeping the letters from moving around and creating little
scuffs in the paint around the edge of each letter.
Bill


triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums