triumphs
[Top] [All Lists]

Re: [TR] TR6 Servo Question

To: triumphs@Autox.Team.Net
Subject: Re: [TR] TR6 Servo Question
From: Dave1massey@cs.com
Date: Sun, 10 Jul 2011 10:20:35 -0400 (EDT)
In a message dated 7/9/2011 11:50:36 AM Central Daylight Time, 
emanteno@comcast.net writes: 
> I have just received a rebuilt servo and it came without the white 
> plastic
> fitting for the vacuum line. I have the
> fitting that I need in another servo unit, but I don't know how to get it
> out and have a strong desire not
> to break it while trying to get it out. Has someone out there been there,
> done that?
> 

As I recall, it just twists and pulls out.  There is a bit of a barb but 
the rubber bushing does all the sealing.  Of course, the rubber may have lost 
some of its resiliance over the years and this may make removal a problem.  
Maybe some penetrating oil will help.

I changed mine out but that was 15 - 20 years ago.

Dave


triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>