I use Allen head cap screws too, on my 3A, although I have never had to
install a nyloc nut.
Mike
----- Original Message -----
From: "Geo Hahn" <ahwahneetr@gmail.com>
To: <thenicholls@verizon.net>
Cc: <triumphs@autox.team.net>
Sent: Monday, May 30, 2011 7:59 PM
Subject: Re: [TR] Read drivers lever shock (damper)
> On Mon, May 30, 2011 at 9:02 AM, <thenicholls@verizon.net> wrote:
>
>> I see on the archive someone suggesting longer bolts and a nyloc bolt on
>> the other side.
>
>
> I prefer the all-metal style locking nut for that spot -- plus blue
> loctite. Also, on TR3s there is a clearance problem getting a wrench on
> the
> bolt head so I use a allen-head cap screw there. It seems to be a tough
> bolt to keep tight.
>
> Hopefully a TR6 owner can advise you on size.
>
> Geo
>
--------------------------------------------------------------------------------
> triumphs@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/triumphs/mmarr@notwires.com
>
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|