I just went to the local FLAPS and bought the heaviest gasket material they
had, and use a double thickness of that.
Bill
Bill Beecher
'58 TR-3A TS30766L "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of tfansher at comcast.net
Sent: Saturday, March 19, 2011 3:15 PM
To: Angelo Graham
Cc: triumphs at autox.team.net
Subject: Re: [TR] Hood dzus fastener brackets - TR2/3
THey are available from the usual sources. Red thick cardboard type
material.
You shim them up so that the hood aligns correctly with the front cowl.
Tom
----- Original Message -----
From: "Angelo Graham" <agraham at execulink.com>
To: triumphs at autox.team.net
Sent: Saturday, March 19, 2011 4:36:05 PM
Subject: [TR] Hood dzus fastener brackets - TR2/3
Hello LIst:
Looking at some finishing touches on my project and wondering what listers
have used under the dzus fastener brackets. When I removed them, there was
some form of petrified rubber underneath them.
Do you have to try to 'shim' the brackets to contact the dzus fastener, or
is about 1/4" of material enough to do the job? Thought of using layers of
old inner-tube rubber - material on hand.
Thanks in advance.
Angelo Graham
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net
|