[TR] Hood dzus fastener brackets - TR2/3

[tfansher at comcast.net (tfansher at comcast.net)]

THey are available from the usual sources. Red thick cardboard type material. 
You shim them up so that the hood aligns correctly with the front cowl. 
Tom 
----- Original Message ----- 
From: "Angelo Graham" <agraham at execulink.com> 
To: triumphs at autox.team.net 
Sent: Saturday, March 19, 2011 4:36:05 PM 
Subject: [TR] Hood dzus fastener brackets - TR2/3 

Hello LIst: 
Looking at some finishing touches on my project and wondering what 
listers have used under the dzus fastener brackets. When I removed them, 
there was some form of petrified rubber underneath them. 
Do you have to try to 'shim' the brackets to contact the dzus fastener, 
or is about 1/4" of material enough to do the job? Thought of using 
layers of old inner-tube rubber - material on hand. 
Thanks in advance. 
Angelo Graham