[TR] Triumphs Digest, Vol 5, Issue 96

[cliff_hansen at earthlink.net (Cliff Hansen)]

One pass with a file to meet the obligation of removing metal from the 
reamer.
Then bend the reamer and use it.  The eccentric movement will cut a larger 
hole.

I'm sure that's not the solution you wanted :)

Cliff



-----Original Message----- 
From: Randall
Sent: Friday, March 18, 2011 1:26 PM
To: triumphs at autox.team.net ; nafzigerg at yahoo.com
Subject: Re: [TR] Triumphs Digest, Vol 5, Issue 96

> My concern with modifying the reamer by hand is that you could make the
> reamer cut oversize,

That would actually be a very useful trick sometimes.  If anyone figures out
how to make a reamer cut larger by grinding metal away from it, please let
me know!

-- Randall

_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account: 
http://autox.team.net/mailman/options/triumphs/cliff_hansen at earthlink.net