Re: [TR] Triumphs Digest, Vol 5, Issue 96

[John Herrera <jrherrera90@hotmail.com>]

Or if you don't hold it perfectly straight!
 
I have experimented with this.
 
John H.
 

> Then bend the reamer and use it. The eccentric movement will cut a larger 
> hole.
> 
> I'm sure that's not the solution you wanted :)
> 
> Cliff

 
> > My concern with modifying the reamer by hand is that you could make the
> > reamer cut oversize,
> 
> That would actually be a very useful trick sometimes. If anyone figures out
> how to make a reamer cut larger by grinding metal away from it, please let
> me know!
> 
> -- Randall
                                          
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums