Hi List,
It took me awhile to find this website again but there is a really nice
application of a Ford Mustang "quarter panel plug" that a guy used when
restoring his TR6 to vent the scuttle out the front of the metal baffle that
goes between the outer fender and the inner fender. I have seen other attempts
at routing that little rubber hose thru a hole cut into the sill but this is
really slick and not that expensive. If you go to the link below and scroll
down a little past halfway, you will see a picture of the Mustang part in the
package and the next picture shows the drain plugs installed. Very slick..
http://www.74tr6.com/repainting.htm
There is a lot of other nice improvements detailed on this website but I
thought I would pass along this nice scuttle vent idea.
Dave Connitt
|