Chris,
I can't say if my method would be "factory approved" but I make a few turns
of ordinary copper wire to fashion a similar looking ball and use silver
solder to make it permanent. Do not use lead solder and do use a good silver
solder flux. Also, protect the cable housing from the heat.
Do not attempt this if your soldering skills are suspect.
Greg
----- Original Message -----
From: "Chris Simo" <ccsimonsen@gmail.com>
To: "list Triumph" <triumphs@autox.team.net>
Sent: Sunday, March 13, 2011 7:17 PM
Subject: [TR] Cable fabrication
>I need to adapt a modern cable to my tr4 choke cable. I think I have
> it figured out cept for one thing. I need a little slug of what Looks
> like solder ball at the end of the cable. Any one out there know how
> to make a solder ball at the end of a steel cable?
>
> Thanks chris
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|